Get Financing Design Yours Build Your Own

Vertical Platform Lifts

Harmar VPLX-DC

The Harmar VPLX-DC is a battery-powered vertical platform lift built for homes where dependable operation matters most — including during a power outage. Instead of running directly off household AC power, the lift is driven by four 12-volt batteries that are continuously maintained by a built-in charger plugged into a standard 120V GFCI outlet on a 15 amp circuit. That DC design means the lift keeps running when the power goes out, and installation needs nothing more exotic than an ordinary outdoor outlet.

Harmar VPLX-DC

What sets the VPLX-DC apart is battery power. Four 12-volt batteries, kept charged by a built-in charger on a standard 120-volt outdoor outlet, drive the lift — so it keeps working when the power goes out. It carries 750 pounds at a steady 10 feet per minute, with two tower heights to match your site: a 4-foot tower for rises from 8 to 53 inches and a 6-foot tower for 32 to 77 inches. Five platform sizes fit most mobility devices, and an automatic folding ramp eases entry at grade. Harmar’s Steady Drive gives a smooth, quiet ride, the Big Blue Paddle is easy to operate, and a battery status indicator, overspeed brake, overload protection, and gate interlocks come standard. An optional battery-warmer kit helps in freezing months.

Home Accessibility Solutions is a family-owned company, and our installers are licensed elevator mechanics with factory training — not subcontractors. The same people who measure your porch or deck at the free consultation are the ones who install your VPLX-DC and service it for years afterward. If you don’t need battery operation, ask us how it compares with the VPL400-X, or with the Highlander II for taller rises — we install all three, and we’ll give you a straight answer.

Model overview

Why choose the Harmar VPLX-DC

The Harmar VPLX-DC is a vertical platform lift that carries you and your wheelchair, scooter, or power chair straight up between levels — over porch steps, onto a deck, or from the garage into the house. What sets it apart is its battery power. Four 12-volt batteries, kept charged by a built-in charger, drive the lift, so it keeps working even when the power goes out. It lifts up to 750 pounds at a steady 10 feet per minute.

The VPLX-DC fits a wide range of homes. It comes in two tower heights: a 4-foot tower for lifting heights from 8 to 53 inches, and a 6-foot tower for 32 to 77 inches — a good match for porches, decks, and raised entries. Five platform sizes, from 36 by 48 inches up to 42 by 60 inches, fit most mobility devices. You can also add options like a 90-degree enter and exit, platform and landing gates, key lock controls, and a cold weather battery warmer for freezing months.

Runs during power outages

A lift that runs on household power stops when the electricity does. The VPLX-DC runs on four 12-volt batteries instead, kept topped off by a built-in charger that plugs into a standard 120V GFCI outlet. If a storm knocks out the power, the lift keeps working — so nobody is stranded on the porch or stuck inside. It also makes installation simpler: an ordinary outdoor outlet is all the electrical work it needs. See it on the manufacturer’s site →

Smooth, quiet Steady Drive

The VPLX-DC uses Harmar’s Steady Drive system — a fully sealed 48-volt DC motor and gearbox turning an ACME screw. A screw drive moves the platform in a slow, controlled way, which is why the ride feels smooth, quiet, and stable from bottom to top. The platform travels at a steady 10 feet per minute the whole way up.

Easy controls for any hands

Small buttons are hard when your hands are stiff or your eyesight isn’t what it used to be. Harmar’s Big Blue Paddle is a large 4-inch by 5-inch rocker control in a high-contrast color, so it’s easy to see and easy to press. It works on constant pressure — hold it to move, let go to stop — which keeps the rider in control at all times.

Built to live outside

This lift is made to go in outdoors — at a porch, deck, or raised entry — so Harmar finishes the tower and guard panels in a SealKor exterior-grade powder coat made for outside weather. For hard Midwest winters, an optional cold weather kit adds a battery warmer that keeps the batteries at full strength through freezing temperatures, protecting outdoor performance year-round.

Safety at every step

Safety equipment comes standard, not as an add-on: a safety pan beneath the platform, an emergency stop button on the platform, a mechanical overspeed brake, overload protection, interlocks for gates, a battery status indicator with lockout, and an integrated power disconnect. An automatic folding ramp eases you on at ground level, then folds up during travel. The lift is ETL listed and built to safety standard ASME A18.1-2020.

Covered twice after install

Harmar backs the VPLX-DC with a 2-year limited parts warranty from the date of installation, with batteries covered for 6 months. On top of that, every installation carries our own 6-month workmanship warranty: if our work was not done right, we come back and fix it at no cost to you. And because we service what we install, the same local team answers the phone.

Family-owned · Wichita, Kansas

From our family to your home

We’re Home Accessibility Solutions, a family-owned company in Wichita serving families across Kansas, Missouri, Oklahoma, and Arkansas. It starts with a free in-home assessment: we measure your site, listen to what you need, and give you a straight answer with a written quote — no pressure. Our own licensed installers put in every lift, and we service what we install, so help is one call away for years to come. Call us at (316) 361-6220 to get started.

Schedule Our Team Today
Harmar VPLX-DC installed outdoors beside porch steps, built for winter weather
Capacity750 lb
Lift heightUp to 77″
Speed10 FPM
PowerFour 12V batteries
CodeASME A18.1-2020
Warranty2-year limited (Harmar)

What comes standard

Included on every unit we install — no add-on cost.

Harmar VPLX-DC

What comes standard

  • 750 lb lifting capacity
  • DC battery power: four 12V batteries maintained by a 120VAC charger — keeps operating during power outages
  • Plugs into a standard 120VAC GFCI outlet on a 15 amp circuit
  • Big Blue Paddle: 4″ x 5″ high-contrast, constant-pressure rocker control
  • Steady Drive ACME-screw drive system for a smooth, quiet, stable ride
  • Automatic folding ramp
  • SealKor exterior-grade powder coat on tower and guard panels
  • Safety pan beneath the platform
  • Battery status indicator with lockout
  • Emergency stop button in the platform
  • Mechanical overspeed brake and overload protection
  • Interlocks for gates
  • Integrated power disconnect
  • Rated for residential applications

Specifications

Everything your builder and installer will ask about — and everything we confirm in person at your free in-home assessment.

ApplicationResidential; indoor/outdoor (SealKor exterior-grade finish)
Maximum capacity750 lb
Tower heights4′ or 6′ tower
Lifting height8" to 53" (4′ tower); 32" to 77" (6′ tower)
Lift speed10 FPM (feet per minute)
Drive system2/3 hp 48V fully sealed DC motor with gearbox driving an ACME screw
PowerFour 12V 7AH batteries with 120VAC charger; standard 120VAC GFCI outlet on a 15 amp circuit
Platform sizesFive clear sizes, 36" x 48" up to 42" x 60"
Duty cycle6 cycles per hour maximum
Controls4" x 5" constant-pressure paddle (Big Blue Paddle)
Exterior finishSealKor exterior-grade powder coat on tower and guard panels
CertificationsETL listed; CSA B44.1/ASME A17.5-2019; ASME A18.1-2020

Configurations

Tower, platform and entry choices from Harmar’s VPLX-DC sell sheet.

Tower height

4′ tower

8″ – 53″ lift height

6′ tower

32″ – 77″ lift height

Platform sizes

36″ x 48″

Clear platform with 36″ guard panel

36″ x 54″

Clear platform with 42″ guard panel

36″ x 60″

Clear platform with 42″ guard panel

42″ x 54″

Clear platform with 42″ guard panel

42″ x 60″

Clear platform with 42″ guard panel

Entry

Adjacent / 90° enter-exit

Listed as an option on Harmar’s sell sheet.

Documents

Manufacturer brochures, owner’s manuals, and planning guides — yours to download.

Brochures & Product Guides

See the product, options and finishes at a glance — the best starting point for homeowners.

Owner’s Manuals & Care

How to operate and care for your unit day to day — for owners after installation.

Contractors

Working on the home? These are the technical documents your trades will ask for — electrical requirements, floor cut-outs, framing, and installation planning. Questions? Our licensed elevator mechanics are one call away at (316) 361-6220.

Electrical

Power requirements and wiring schematics — hand these to your electrician.

Installation References

Factory installation instructions — how our certified crew installs it; helpful for contractors coordinating the job.

Optional upgrades

Ways to make this model fit your home and your routine even better. We price any of these into your written quote — just ask.

↪

Optional upgradeAdjacent (90°) Enter/Exit

Configure the platform so you enter on one side and exit at a right angle — a lifesaver on tight sites where a straight-through path isn’t possible.

🚪

Optional upgradePlatform & Landing Gates

36″ or 42″ platform and landing gates with interlocks keep every opening securely closed unless the platform is at that landing.

🔑

Optional upgradeKey Lock Controls

Add a key lock to the platform or landing controls so only the people you choose can operate the lift.

❄

Optional upgradeCold Weather Kit

A battery warmer keeps the lift’s batteries at full strength through freezing weather, protecting outdoor performance and battery life year-round.

🔧

Optional upgradePit and/or Float Switch

Site-specific safety switches for installations with a pit or where water may collect, stopping the lift when conditions below the platform aren’t safe.

Two warranties on every install

You’re covered twice

Manufacturer warranty

2-year limited warranty. From Harmar’s published warranty (VPLX-DC Owner’s Manual): “Harmar Mobility warrants, to the original purchaser of a VPLX-DC Vertical Platform Lift (VPL), that the device has been manufactured by Harmar to be free of defects in material, mechanical and electrical component (parts), excluding labor costs, and paint, for a period of two (2) years from date of installation, provided that the products have been installed, maintained and operated properly.” Harmar’s VPLX-DC sell sheet lists battery coverage at 6 months. Paint adhesion and deep rust are limited to one year, with cosmetic-rust and coastal-installation exclusions; full terms are in the Owner’s Manual.

Our workmanship warranty

Every installation also carries our 6-month workmanship warranty, on top of the manufacturer’s warranty. If our installation needs an adjustment, we come back and make it right at no cost to you. We ask clients to allow five to ten business days for a return trip, though it is often much sooner. The warranty covers our workmanship; it does not cover acts of God, user error, or misuse of the equipment.

Is the Harmar VPLX-DC right for your home?

The only way to know is a free in-home assessment. We measure, we listen, and you get a straight answer with a written quote — no pressure.

Schedule Our Team Today Call (316) 361-6220
Call today Book online