Vertical Platform Lifts
Harmar Highlander II
The Harmar Highlander II is a vertical platform lift (VPL) designed to safely lift you while you remain in your scooter, manual wheelchair, or power chair — so you can go where you want, when you want, how you want. With a 750 lb weight capacity and six tower heights covering lifts from 4 feet all the way to 14 feet, the Highlander II provides access to decks, porches, garage entries, second-story entries, and elevation between floors.

The Highlander II carries up to 750 pounds — you and your scooter, wheelchair, or power chair together — on six tower heights that cover rises from 4 feet to 14 feet. That covers decks, porches, garage entries, second-story entries, and floor-to-floor access, in far less space than a ramp: 24 inches of steps would take roughly 24 feet of ramp. Harmar’s Steady Drive ACME screw turns slower than competing drives for a smoother, quieter ride, the Guardian System’s LED lights show at a glance that the lift is ready or needs service, and the Big Blue Paddle gives you a large, easy-to-find control. It’s built to live outdoors with an exterior-grade powder coat and stainless hardware, and it can be ordered with a factory enclosure where weather or code calls for one, plus an optional ReadyUPS battery backup.
Home Accessibility Solutions is a family-owned company, and our installers are licensed elevator mechanics with factory training — not subcontractors. The same people who measure your entry at the free consultation are the ones who install your Highlander II and service it for years afterward. If you’re only going up a few steps rather than a full story, ask us how the Highlander II compares with the compact VPL400-X or the battery-powered VPLX-DC — we install all three, and we’ll tell you straight which one fits your home or building.
Model overview
Why choose the Harmar Highlander II VPL
The Harmar Highlander II is a vertical platform lift — a compact lift that carries you straight up while you stay seated in your scooter, wheelchair, or power chair. It lifts up to 750 pounds and comes in six tower heights, handling rises from 4 feet all the way to 14 feet. What sets it apart is how little room it needs: a 24-inch set of steps would take roughly 24 feet of ramp — or one compact Highlander II.
You have real choices with this lift. Five platform sizes, from 36″ x 48″ up to 42″ x 60″, fit most mobility devices — often with room for a caregiver too. It is rated for both homes and businesses, and its exterior-grade finish with stainless steel hardware is made to live outside on a deck, porch, or garage entry. Options include a factory enclosure for weather protection or code compliance, a ReadyUPS battery backup, gates, entry ramps, call/send controls, and a three-stop setup.
A smoother, quieter ride
The Steady Drive system uses a high-lead ACME screw that turns up to 75% slower than competing drives, which is why the ride feels noticeably smoother and quieter. Its sealed gearbox replaces the pulleys found on traditional lifts, which can mean fewer maintenance visits over the years. Slow, steady, and quiet is exactly what you want from a lift that sits right outside your door. See it on the manufacturer’s site →
It keeps an eye on itself
The Guardian System puts four bright LED status lights in the top cap, so you can see at a glance that the lift is ready, whether the batteries are getting low, or when maintenance is due. Behind the scenes, the SmartSense PC board tracks motor temperature, cycle count, and battery status, helping catch small issues before they affect performance. It is a lift that tells you how it is doing — no guessing.
Controls anyone can use
Small switches can be hard to find and hard to operate, especially with limited hand strength or eyesight. The Big Blue Paddle replaces them with a large 4″ x 5″ high-contrast rocker control: rest your hand on it and press the direction you want to go. It is a constant-pressure control, so the platform moves only while you are pressing and stops the moment you let go. (Not available on three-stop units.)
Built to live outside
This lift is made to live outside in Midwest weather. The tower and guard panels have a SealKor exterior-grade powder coat with stainless steel hardware, so it can sit on a porch, deck, or garage entry year-round. Five clear-platform sizes, from 36″ x 48″ up to 42″ x 60″, fit most scooters, wheelchairs, and power chairs — often with room for the rider’s caregiver too.
Safety at every level
The Highlander II is built to national safety standards — ETL listed, certified to ASME A17.5-2019/CSA B44.1, and built to ASME A18.1-2020. Standard safety equipment includes a safety pan beneath the platform, an emergency stop button, an overspeed brake, overload protection, electric and mechanical holding brakes, and interlocks that keep doors and gates securely closed unless the platform is at that landing. A manual lowering tool is included as well.
Covered twice on every install
The Highlander II is backed by Harmar’s 3-year limited parts warranty, with Harmar-supplied batteries covered for one year. On top of that, every installation we do carries our own 6-month workmanship warranty: if our work was not done right, we come back and fix it at no cost to you — excluding acts of God, user error, or misuse of the machine. And because we service what we install, help down the road is one call away at (316) 361-6220.
Family-owned · Wichita, Kansas
From our family to your home
Working with us is simple. We are a local company based in Wichita, and every project starts with a free in-home assessment — we measure your space, listen to what you need, and give you a straight answer with a written quote, no pressure. Our own licensed installers put in every lift, and we service what we install, so the people who set it up are the same people who stand behind it. Call us at (316) 361-6220 to get started.
Schedule Our Team Today
What comes standard
Included on every unit we install — no add-on cost.

What comes standard
- 750 lb lifting capacity
- Big Blue Paddle — 4″ x 5″ high-contrast rocker control (not on three-stop units)
- Guardian System — 4 LED status lights in the top cap
- SmartSense PC board monitors motor temperature, cycle count, and battery
- Steady Drive high-lead ACME screw with sealed gearbox
- SealKor exterior-grade powder coat with stainless steel hardware
- Safety pan beneath the platform
- Emergency stop button in the platform
- Overspeed brake and overload protection
- Electric and mechanical holding motor brake
- Interlocks for doors and gates
- Manual lowering tool
- Rated for commercial and residential use
Specifications
Everything your builder and installer will ask about — and everything we confirm in person at your free in-home assessment.
Configurations
Tower and platform sizes from Harmar’s Highlander II (VPL400–VPL1400) product specifications sheet. The tower is sized to your lifting height at the site visit.
Tower sizes
VPL400
Lifts up to 53″ · 72″ tower
VPL600
Lifts up to 77″ · 101″ tower
VPL800
Lifts up to 101″ · 125″ tower
VPL1000
Lifts up to 125″ · 149″ tower
VPL1200
Lifts up to 149″ · 173″ tower
VPL1400
Lifts up to 171″ · 197″ tower
Standard platform size (inside)
VPL400 – VPL600
36″ W x 48″ L x 36″ H
VPL800 – VPL1400
36″ W x 54″ L x 42″ H
Gallery
The unit and its finishes.
Documents
Manufacturer brochures, owner’s manuals, and planning guides — yours to download.
Brochures & Product Guides
See the product, options and finishes at a glance — the best starting point for homeowners.
Specifications
Capacities, dimensions and technical details at a glance.
Owner’s Manuals & Care
How to operate and care for your unit day to day — for owners after installation.
Contractors
Working on the home? These are the technical documents your trades will ask for — electrical requirements, floor cut-outs, framing, and installation planning. Questions? Our licensed elevator mechanics are one call away at (316) 361-6220.
Installation References
Factory installation instructions — how our certified crew installs it; helpful for contractors coordinating the job.
Electrical
Power requirements and wiring schematics — hand these to your electrician.
Optional upgrades
Ways to make this model fit your home and your routine even better. We price any of these into your written quote — just ask.
Optional upgradeFull Enclosure Configuration
The Highlander II with Enclosure adds a factory enclosure kit — acrylic or steel panels, a ventilated acrylic roof, and a 6’8″ lower door and upper landing gate — for weather protection and code compliance. Enclosures are required for commercial lifting heights of 60″ or more and whenever the lift penetrates a floor, and the kit avoids building a hoistway.
Optional upgradeReadyUPS Battery Backup
A true battery backup (UPS) that automatically takes over in a power outage, delivering a minimum of 5 complete up-down cycles so you’re never stranded between levels.
Optional upgradePlatform & Landing Gates
36″ or 42″ platform gates with EMI interlock and 36″ or 42″ landing gates with interlock — plus fire-rated doors where required — so openings stay securely closed unless the platform is at that landing.
Optional upgradeFixed or Auto-Fold Ramp
A fixed or automatically folding entry ramp (36″ or 42″ wide) smooths the transition onto the platform at grade level and folds up to act as a wheel stop during travel.
Optional upgradeWired or Wireless Call/Send Controls
Call the platform to your landing, or send it to another one, without being on the lift — handy when family members share the lift between levels.
Optional upgrade3-Stop Configuration
Serve three landings with a 3-button control panel — useful for decks or homes with an intermediate level.
Optional upgradeConvenience Options
Grab bar in the platform, key lock for the platform controls, phone jack, and a lighted E-Stop with alarm let you tailor the lift to your site and security needs.
You’re covered twice
Manufacturer warranty
3-year limited warranty. From Harmar’s published warranty (Highlander II Owner’s Manual): “Harmar Mobility warrants, to the original purchaser of a Highlander II Vertical Platform Lift (VPL), that the device has been manufactured by Harmar to be free of defects in material, mechanical and electrical component (parts), excluding labor costs, and paint, for a period of three (3) years from date of installation, provided that the products have been installed, maintained and operated properly. Harmar supplied batteries are limited to one (1) year from date of installation.” Paint adhesion and deep rust are limited to one year, with cosmetic-rust and coastal-installation exclusions; full terms are in the Owner’s Manual.
Our workmanship warranty
Every installation also carries our 6-month workmanship warranty, on top of the manufacturer’s warranty. If our installation needs an adjustment, we come back and make it right at no cost to you. We ask clients to allow five to ten business days for a return trip, though it is often much sooner. The warranty covers our workmanship; it does not cover acts of God, user error, or misuse of the equipment.
Is the Harmar Highlander II right for your home?
The only way to know is a free in-home assessment. We measure, we listen, and you get a straight answer with a written quote — no pressure.
Schedule Our Team Today Call (316) 361-6220


