Get Financing Design Yours Build Your Own

Wheelchair Elevator for Home: How the Stiltz Trio Alta Fits Your Chair

For a lot of families, a wheelchair quietly takes the upstairs away. The bedroom moves to the dining room. The office, the spare rooms and the boxes of holiday things all sit one staircase out of reach. A wheelchair elevator for home can give that floor back, and it doesn’t have to mean building a shaft through the house.

The Stiltz Trio Alta is the Stiltz lift built for wheelchair users. Below, we cover how it works, how much room it needs, and when a different lift would serve you better.

Can a Wheelchair Elevator for Home Work Without a Shaft?

Yes. The Stiltz Trio Alta carries a full-size wheelchair or up to three people, with a maximum load of 550 pounds (local code may limit it to 500). It needs no shaft, no pit, no machine room and no hydraulics. The cab rides on two self-supporting rails, covers just 15 square feet, and plugs into a dedicated 220-volt outlet.

Stiltz designed the car body around a wheelchair from the start. The entrance is 31 1/2 inches wide. A gently angled ramp is built into the car, so you get level access with every door option. Inside, the floor measures 42 5/16 by 30 7/16 inches, with up to 76 7/16 inches of height.

The machinery stays out of sight. A quiet, self-contained rope drum drive with a braked gear motor is tucked into the roof space of the car. So there’s no separate machine room to set aside anywhere in your house.

Safety is layered in, too. An LED light curtain stops the lift if the beam across the entrance is crossed. The car won’t move until the interlocked door is fully closed. Obstruction sensors, a load sensor, out-of-balance sensors, a patented fall-arrest mechanism and a built-in brake back that up.

Stiltz Trio Alta at a Glance

  • Capacity: 550 pounds, for a full-size wheelchair or two to three people (local code may limit it to 500)
  • Footprint: just 15 square feet of floor
  • Inside the car: 42 5/16″ by 30 7/16″, with up to 76 7/16″ of height
  • Entrance: 31 1/2″ wide, with a built-in ramp for level access
  • Floors served: up to three, with as much as 19′ 8 1/4″ of total travel
  • Power: a standard dedicated 220-volt outlet
  • Outage protection: a battery back-up that brings you down to the lower floor
  • Warranty: a 2-year Stiltz parts warranty, with our 6-month workmanship warranty on top

Stiltz Trio Alta Dimensions and Footprint: Will It Fit?

Two things have to fit: your chair and your house. Start with the chair. The car’s interior is 42 5/16 by 30 7/16 inches, and the doorway is 31 1/2 inches wide. Jot down your chair’s width and length before we visit. We’ll check them against the car with you, along with the combined weight of rider and chair.

Then the house. The Stiltz Trio Alta footprint is just 15 square feet. The opening cut into the floor above measures 50 3/8 by 41 1/4 inches. Upstairs, the ceiling has to be at least 96 inches high, and we measure it at the consultation.

Because the lift stands on its own two rails, it doesn’t need a load-bearing wall. It can go in the corner of a room, a stairwell void, a landing, a closet or a garage, and even under a sloping or vaulted ceiling. That flexibility is what makes a through-the-floor wheelchair elevator possible in homes that were never planned for one.

You also choose how you get in and out. A single entrance is standard. The ThruCar walk-through option adds a second entrance on the opposite side. A wheelchair rolls in one side and straight out the other, with no backing up inside the lift. The standard door is an interlocked half-height door, 43 5/16 inches tall, and an interlocked full-height door is available. The door can hinge on the left or the right.

Riding it is simple. You hold the button on the in-car panel for the whole trip, and two wireless remotes let you call and send the lift. An optional fold-down seat folds out of the way when the lift carries a wheelchair.

Who the Trio Alta Is a Good Fit For

The Trio Alta makes the most sense when:

  • Someone in the home uses a wheelchair now, or may later.
  • You want to ride with a chair, or with two or three people at once.
  • You have two floors, or three, that you want to keep using.
  • There’s no room for a shaft, but there is about 15 square feet to spare.

AARP’s 2024 Home and Community Preferences Survey found that 75% of adults 50 and older want to stay in their current homes as they age. If you plan to stay, here’s our honest advice. If you’re installing a home elevator anyway, the wheelchair-capable Trio is the one to buy. Needs can change over the years. A lift that already takes a full-size chair won’t leave you starting over if they do.

It isn’t the right lift for every home, though. If your chair and rider need more capacity than the Trio’s 550 pounds, look at the Savaria Telecab 17. It carries 845 pounds and offers an optional roomier 36-by-54-inch cab for larger power wheelchairs and scooters. It serves two stops rather than three. We install both, and we’ll tell you straight which one suits your chair and your house.

If the real problem is a few steps up to the porch, not a staircase inside, a platform lift may be the simpler answer. Our post on choosing a home elevator vs. a vertical platform lift walks through that decision. And if you’re new to Stiltz, start with Stairs Got You Stuck? Meet the Stiltz Home Elevator That Fits Almost Anywhere.

Working With Us, From Visit to Install

Everything starts with a free in-home consultation. We measure the spot, the upstairs ceiling and your chair, and we listen to how your days actually go. After that, you receive a clear written quote. That visit is the only way to pin down an exact figure, because no two houses are alike.

If you’re in Wichita, every job needs a permit, and we take care of it for you. The prep work comes next, such as opening the floor and setting up the outlet. Because the Trio Alta arrives in modular sections, a standard installation takes just one day once that home modification is complete.

Our installers are factory-trained, not subcontractors, and the same family-owned team services your lift for years afterward. Stiltz includes a 2-year (24-month) parts warranty, and our 6-month workmanship warranty covers the installation on top of that.

For every standard feature, option and planning document, see the full specs and options for the Stiltz Trio Alta. Our Stiltz home lifts page shows both Stiltz models, and our through-the-floor elevators page shows all of our shaftless models.

Related reading: How Much Space Does a Home Elevator Need? Planning a Savaria Eclipse and Stiltz Duo Alta Dimensions and Weight Limit: Will It Fit Your Home?.

Frequently Asked Questions

Will my wheelchair fit in the Stiltz Trio Alta?

Stiltz built the Trio Alta to carry a full-size wheelchair. The doorway is 31 1/2 inches wide, and the floor inside is 42 5/16 by 30 7/16 inches. The 550-pound limit covers the rider and the chair together, and local code may lower it to 500. We check your chair against these numbers at the consultation.

How much does a wheelchair elevator for home cost?

It depends on your house and your choices. The spot you pick, the work to open the floor and the power at that location all matter. So do options like the ThruCar entrance, a full-height door or a third floor. Your free in-home consultation ends with an exact figure in writing. If you’d rather not pay all at once, see the Stiltz financing details below.

Can the Trio Alta go up to a third floor?

Yes. The Trio Alta can serve up to three floors, with as much as 19 feet 8 1/4 inches of total travel. A two-floor installation is the standard setup, and a three-floor installation is also available.

Is there a phone inside the Trio Alta?

Yes. Every Trio Alta comes with a landline telephone inside the car. If you don’t keep a landline, a cell phone option is available instead. The in-car panel also has an emergency stop button.

Use Someone Else’s Money While You Avoid the Stairs

A Stiltz home elevator is more affordable than most families expect. Qualified buyers can use Stiltz financing to get rates as low as 6% interest, with payments around $250 a month. You can also pay it off early at any time.

And when you love your Stiltz, your friends will hear about it. Stiltz pays you a $1,500 referral bonus when someone you refer has their Stiltz installed, and that’s for every installed referral.

Serving Wichita, Oklahoma City and the Region

We’re a family-owned company, based in Wichita since 2017, with our office at 306 North Saint Clair Street. We install Stiltz home elevators for families across Kansas, Oklahoma, Arkansas and Missouri. Whether you live in our Wichita service area or in Oklahoma City, we’ll come to your home, measure carefully and give you a straight answer.

See if a Stiltz Trio Alta fits your home and your chair.

We’ll measure your space and your chair, then give you a clear written quote. Book your free in-home consultation or call (316) 361-6220.

About Home Accessibility Solutions

Home Accessibility Solutions is a family-owned lift and elevator company in Wichita, Kansas, founded in 2017 by Carl and Michelle Carnnahan. Carl is a licensed elevator mechanic. Our family helps homeowners and businesses across Kansas, Oklahoma, Arkansas and Missouri choose, install and service stair lifts, home elevators and wheelchair lifts. Meet our family.

Call today Book online